How do I capture a package's weight from a USB scale at the ship station?
Last updated: November 6, 2026
Before you start
The ship-station PC must run the Print Station app and be paired with Luminous, and it must show as online.
A USB scale must be plugged into that PC and detected by the Print Station app. If the app reports no scale, Weigh won't work.
Weigh a package
Go to Operations → Fulfillment Orders and select the Shipping view.
Tick one fulfillment order. The Print Labels panel opens.
In Packages, click Add a box if there isn’t a package yet.
Put the box on the scale and click Weigh.
The weight fills in with a note such as “Weighed 1.5 lb on Packing Desk 1.” It’s saved to the package.
Print the label as usual.
The weight is shown in the unit set for the panel.
Which station is read?
If you have printed from a station recently, Luminous uses that station if it is online and has a scale.
Otherwise, if exactly one online station has a scale, Luminous uses it.
If more than one online station has a scale and none is remembered, you'll see "More than one print station has a scale". Print to the station at your desk first, then click Weigh.
If it doesn't work
You can always type the weight instead. Weigh never blocks packing.
“Scale not available — pair a print station with a USB scale, or type the weight.” Check that the Print Station app is running and the scale is plugged in.
“More than one print station has a scale — print to the one at your station first, then Weigh.”
“Scale not available — type the weight or try again.” The reading was unstable, zero or timed out. Let the scale settle and retry.